Show Interfaces Configuration - Dell N1100-ON Reference Manual

Clock: Master
Admin Local link Advertisement
Oper Local link Advertisement
Oper Peer Advertisement
Priority Resolution

show interfaces configuration

Use the show interfaces configuration command in User Exec mode to
display the configuration for all configured interfaces.
Syntax
show interfaces configuration [{gigabitethernet unit/slot/port| port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The displayed port configuration information includes the following:
Field Description
Port The port number.
Description The port designated IEEE shorthand identifier. For example
1000Base-T refers to 1000 Mbps baseband signaling including both
Tx and Rx transmissions.
Duplex Displays the port Duplex status.
Speed Refers to the port speed.
10000f 1000f 1000h
------ ----- -----
no yes
no yes
no yes
- -
Layer 2 Switching Commands
100f 100h
----- -----
no yes no
no yes no
no yes no
- yes -
10f 10h
----- ----
yes no
yes no
yes no
- -
398