Show Interfaces Configuration - Dell PowerConnect 6224 Command Line Interface Manual

1/g2 1G-Copper
console# show interfaces advertise ethernet 1/g1
Port: Ethernet 1/g1
Type: 1G-Copper
Link state: Up
Auto negotiation: enabled
10h 10f 100h 100f 1000f
Admin Local Link ------ ------ ------ ------ ------
Advertisement yes

show interfaces configuration

Use the show interfaces configuration command in User EXEC mode to
display the configuration for all configured interfaces.
Syntax
show interfaces configuration [ethernet
channel-number
interface — Valid Ethernet port.
•
port-channel-number — Valid port-channel index.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no use guidelines.
Enable
yes
]
1000f
yes yes
interface
| port-channel
Ethernet Configuration Commands
no
port-
293