Command Mode
User EXEC mode
User Guidelines
•
There are no user guidelines for this command.
Example
In the following example, the counters for interface g1 are cleared.
Console# clear counters ethernet g1
set interface active
The set interface active Privileged EXEC mode command reactivates an interface that was
suspended by the system.
Syntax
set interface active {ethernet interface | port-channel port-channel-number}
•
interface—Valid Ethernet port.
•
port-channel-number—Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
•
This command is used to activate interfaces that were configured to be active, but were
shutdown for some reason.
Example
The following example activates interface g5, which is disabled.
Console# set interface active ethernet g5
show interfaces configuration
The show interfaces configuration Privilege EXEC mode command displays the configuration for
all configured interfaces.
Ethernet Configuration Commands
127