Setting Up An Axis Network Camera - HBM SomatXR CX23-R User Manual

CX23-R and EX23-R
Connecting the WLg-xROAD/NP access point for Power over Ethernet (PoE)
This powers the WLg-xROAD/NP access point by PoE and allows use of virtual
networks. The ACKSYS WLg-xROAD/N cannot be powered by PoE.
1. Connect the access point's RJ45 connector to an RJ45 adapter (purchased
separately) appropriately sealed for your application.
2. Use a 1-KAB2106-X cable to connect the adapter to EX23-R 10PoE port.
3. Install caps on the WLg-xROAD power wires.
4. Connect the EX23-R and CX23-R modules to a power supply.
5. Use a 1-KAB2107-X cable to connect the CX23-R HOST port to EX23-R 1 port.
6. Use a 1-KAB2107-X cable to connect the CX23-R ETHERNET 1 port to EX23-
R 2 port.
2.3 Setting up an Axis network camera
The SomatXR/eDAQXR system offers camera input channels through the use of
Axis network cameras with the EX23-R PoE Switch.
a4275-8.0 en HBM: public
2 Setting up the hardware
27