Delta AS Series Programming Manual page 859

AS Ser ies Pro gra mm in g M anu al
Example
When X0.0 is ON, the DFLT instruction converts the values in (D1, D0) and (D3, D2) into floating-point numbers,
1.
and stores the conversion results in (D11, D10) and (D13, D12) respectively.
When X0.1 is ON, the FPOW instruction raises the floating-point number in (D11, D10) to the power of the floating-
2.
point number in (D13, D12), and stores the operation result in (D21, D20).
When X0.2 is ON, the FBCD instruction converts the binary floating-point number in (D21, D20) into the binary-
3.
coded decimal floating-point number, and stores the conversion result in (D31, D30).
_6
Additional remarks
1. For PLC with firmware V1.10.00 or previous versions, if the value in S
SM0 is ON, and the error code in SR0 is 16#2003.
2. For PLC with firmware V1.10.10 or later versions, if the value in S
integer number, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003.
6 - 5 8 0
is less than 0, the instruction is not executed,
1
is less than 0, and the value in S
1
is NOT an
2