Delta AS Series Programming Manual page 1141

AS Ser ies Pro gra mm in g M anu al

The default folder path:

AS CPU firmware version 1.08.30 or later supports up to 200 characters (16#00 included) in the file name S
2. Instruction flags:
_6
3. Related error codes (SR453):
Error code
6 - 8 6 2
S3
'e'
S3 +1
't'
S3+2
NUL
Model name
AS300 Series
AS200 Series
Flag
SM450 ON: the memory card is in the CPU module.
State of the write protection switch on the memory card
SM451 ON: the memory card is write protected.
OFF: the memory card is not write protected.
The data is being written from the PLC to the memory card, or the data is being read
SM452
from the memory card to the PLC.
ON: an error occurs during the operation of the memory card. If the flag is ON, you
SM453
must reset it to OFF. The error code is stored in SR453.
16#005E An error occurs when the memory card is initialized.
16#005F The path is incorrect, or the file does not exist.
16#0060 The default folder cannot be created.
16#0061 The memory space is insufficient.
16#0062 The memory card is write protected.
16#0063 An error occurs when the data is written into the file.
ASCII
S3
'T ' Code
ASCI I代碼
S3 + 1
's'
S3+ 2
'1'
Folder path
PLC CARD\AS300\UserProg
PLC CARD\AS200\UserProg
Description
Description
16#65 1 6#54
16 #74
16#73
16 #00
16#31
3.