Delta AS Series Programming Manual page 395

A S S er i es Pr og r am m ing M an u a l
3. The floating-point number in S
maximum source value; that is, within the range of floating-point numbers. If the floating-point number exceeds the
boundary value, the calculation uses the boundary value.
4. Note that the maximum source value must be larger than the minimum source value. However, the maximum
destination value is not necessarily larger than the minimum destination value.
5. When the maximum source value is the same as the minimum source value, the instruction is be executed, SM0 is
ON and the error code in SR0 is 16#2012.
6. If you declare S
7. If you declare S
_6
6 - 11 6
for 32-bit instructions must be between the minimum source value and the
1
for a 16-bit instruction in ISPSoft, the data type is ARRAY [4] of WORD.
2
for a 32-bit instruction in ISPSoft, the data type is ARRAY [4] of DWORD.
2