Delta AS Series Programming Manual page 884

D112 X
D120 X
Y0.1 OFF
Example 2
Enable DST function and read the DST state.
st
Set the DST to start on 1 April and to end on 3
Setting values and descriptions:
Device Setting Value
D0 1
D1 4
D2 1
D11 9
D12 3
D20 60
Enable contact M0
Y0.0=ON, indicating DST function is enabled.
The PLC system time adds 60 minutes when the date April 1st arrives, and subtracts 60 minutes when the date
September 3rd arrives to end daylight saving time.
Invalid operand
Invalid operand
Node state is OFF.
rd
September and the duration is 60 minutes.
Description
The DST state is ON and in mode 1.
Starting month: April
st
Starting date: the 1
Ending month: September
rd
Ending date: the 3
Duration: 60 minutes
Ch ap te r 6 Ap pl ie d Instruc ti ons
6_
6 - 6 0 5