Delta AS Series Programming Manual page 1137

AS Ser ies Pro gra mm in g M anu al

The default folder path:
2. Instruction flags
Flag
SM450
SM451
SM452
_6
SM453
3. Related error codes (SR453):
Error code
16#005E
16#005F
16#0060
16#0061
16#0062
16#0063
16#0064
16#0065
6 - 8 5 8
S3
'e'
S3 +1
't'
S3+2
NUL
Model name
AS300 Series
AS200 Series
ON: the memory card is in the CPU module.
The write protection switch on the memory card
ON: the memory card is write protected.
OFF: the memory card is not write protected.
The data is being written from the PLC into the memory card, or the data is being read
from the memory card into the PLC.
ON: an error occurs during the operation of the memory card. If the flag is ON, you must
reset it to OFF. The error code is stored in SR453.
An error occurs when the memory card is initialized.
The path is incorrect, or the file does not exist.
The default folder cannot be created.
The memory space is insufficient.
The memory card is write protected.
An error occurs when the data is written into the file.
The data cannot be read from the memory card.
The file is a read-only file.
ASCII
S3
'T ' Code
ASCI I代碼
S3 + 1
's'
S3+ 2
'1'
Folder path
PLC CARD\AS300\UserProg
PLC CARD\AS200\UserProg
Description
Description
16#65 1 6#54
16 #74
16#73
16 #00
16#31