Delta AS Series Programming Manual page 468

X0.0
T he signal is enabled.
D11
D10
SM687
Additional remarks
1. If D+1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#2003.
2. If n is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B.
3. For the 16-bit instruction, if you declare the operand D in ISPSoft, the data type is ARRAY [2] of WORD/INT.
4. For the 32-Bit instruction, if you declare the operand D in ISPSoft, the data type is ARRAY [2] of DWORD/DINT.
SM686=O N
D12
Ch ap te r 6 Ap pl ie d Instruc ti ons
SM686=O FF
X0.0
T he signal is enabled.
D11
D12
D10
SM687
6_
6 - 1 8 9