Delta AS Series Programming Manual page 1251

AS Ser ies Pro gra mm in g M anu al
c)
Immediatelly stop
 When M0 is ON, the TPO instruction is executed and starts to output No. 1 segment.
 When the stop flag SM463 is ON during the output of No.2 segment, the state of the immediately
stop flag SM476 is confirmed.
 If the immediately stop flag SM476 is ON, the output stops after the No. 2 output is complete.
(pulse = 600 K).
 After the stop flag SM463 switches to OFF, the execution of TPO instruciton starts outputting No.3
segment till the output is complete. (pulse = 1200 K)
_6
6 - 9 7 2