Delta AS Series Programming Manual page 901

AS Ser ies Pro gra mm in g M anu al
6. When using on-line editing, please reset the conditional contact to initialize the instruction.
Example
1. X0.0–X0.3 are connected to Y0.0–Y0.3 to form the first DIP switch, and X0.4–X0.7 are connected to Y0.0–Y0.3 to
form the second DIP switch. When X1.0 is ON, the instruction converts the value that you enter with the first DIP
switch into the binary value, and stores the conversion result in D20. The instruction converts the value that you
enter with the second DIP switch into the binary value, and stores the conversion result in D21.
2. When X1.0 is ON, Y0.0–Y0.3 are ON cyclically. After the instruction completes, SM694 is ON for a scan cycle.
3. The following graphic shows the outputs. Y0.0–Y0.3 must be transistors.
X1.0
0.1s
Y0.0
Y0.1
Y0.2
_6
Y0.3
T he execution of the
insturc iton is complete.
SM694
4. The following graphic shows the DIP switches.
Bina ry cod ed d ecim al -
wirin g of D IP sw itch es
A dio de (1 N4 14 8) m u st
b e con ne cted i n series .
6 - 6 2 2
Cycli c ac tion
0.1s
0.1s
Inter ruption
0.1s
0.1s
0 1
10 10
1
1 2 4 8
X 0 .0 X 0.1 X 0 .2 X 0 .3 X 0. 4
F irst D IP sw itch
N o te : Th e tra nsist or o ut pu t mo du le AH 16 AP11 T-5 A is use d in th is exam ple .
0.1s
2 3
1 0 10
3
2 4 8 10
X 0.5 X 0.6 X0 .7 S /S Y 0.3
S eco nd D IP sw tich
+
2 1 0
1 0 1 0 1 0
Y 0.2 Y 0.1 Y0 .0 UP ZP