Delta AS Series Programming Manual page 505

Hide thumbs Also See for AS Series:

Table of Contents

AS Ser ies Pro gra mm in g M anu al

Set up three work stations for D0, 4 objects for D1 and 50 filters for D2. After the contact M0 is activated, the system sets

the object detection, the compared values, the compared counter result of the object entering and leaving, and the output

controls for each work station. For example, the system detects two objects have entered and then four triggers to read

the compared counter results: 3000, 3500, 4500, and 5000 in HC202 (HC202=K5060). The following table shows the

compared value and the head/tail index in the stack area.

Value of the head index (16-bit)

Device D number

Value of the tail index (16-bit)

Device D number

Compared stack area 1 for the entering -work-

station ones (32-bit)

Device D number

Compared stack area 1 for the leaving-work-

station ones (32-bit)

Device D number

Compared stack area 1 for the entering -work-

station ones (32-bit)

Device D number

Compared stack area 2 for the leaving-work-

station ones (32-bit)

Device D number

Show Quick Links

Table of Contents

Troubleshooting