Delta AS Series Programming Manual page 683

AS Ser ies Pro gra mm in g M anu al
[(D1, D0) +( D3, D 2)+(D5, D4 )]/3
(D1, D 0)
(D3, D 2)
(D5, D 4)
Additional remarks
1.
If the value in n is not between 1–256, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#200B.
2.
If S+2*n-1exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#2003.
3.
If the value in S exceeds the range of floating point numbers that can be shown, the instruction is not executed,
SM0 is ON, and the error code in SR0 is 16#2013.
_6
6 - 4 0 4
( D11, D 10)
10 0.1
Aft er the inst ruc ti on is execu ted.
( D11, D1 0)
113.2
123.3
11 2.2