Delta AS Series Programming Manual page 754

Explanation
1.
This instruction is available for PLC with FW V1.06.00 or later and can only support the right-side modules. For PLC
with FW V1.08.00 or later, it can support remote right-side modules (AS00SCM-A with FW V2.06 or later) as well.
2.
This instruction is available for AS04RTD-A (V1.04 or later), AS06RTD-A (V1.00 or later), AS04TC-A (V1.04 or later),
and AS08TC-A (V1.00 or later).
3.
The parameter settings are listed in the following table.
Operand
GROUP DWORD/DINT
MODULE DWORD/DINT
CH DWORD/DINT
UPDATE
Data type Function
Group number
Module number
Channel number
Flags for updates of the PID-
BOOL
related parameters
Cha p ter 6 App l ied Ins truc tio ns
Setting range Description
The RTD/TC module group number
that is connected to the right side of
PLC directly or connected to the
remote module that acts as PLC, e.g.
the first connected module group is
group number 1, the second
connected module group is group
number 2. Up to 15 module group can
be connected and counted.
The module number that is connected
to the right side of PLC directly or
connected to the remote module that
acts as PLC, e.g. the first connected
module is module number 1, the
second connected module is module
number 2. Up to 32 modules can be
connected and counted and each type
of modules should be included in the
count.
Channel number for PID algorithm,
e.g. channel 1 is number 1 for PID
algorithm and channel 2 is number 2
for PID algorithm and so forth.
After enabling this instruction, you can
input a new parameter and set the
UPDATE flag to TRUE to update the
new setting and after updating, the flag
is switched to FALSE automatically.
6_
6-475