Delta AS Series Programming Manual page 1128

Operand Setting value
D0
D1
D10, D11 16#00000030
D300
D20=16#6554
D20 D21=16#7473
D22=16#0031
D30, D31 16#00000000
Additional remarks
1. If the value in C exceeds the range, an operation error occurs, the instruction is not executed, SM0 is ON, and the
error code in SR0 is 16#2003.
2. If the value in S exceeds the range, an operation error occurs, the instruction is not executed, SM0 is ON, and the
1
error code in SR0 is 16#2003.
3. If the value in S exceeds the range, an operation error occurs, the instruction is not executed, SM0 is ON, and the
2
error code in SR0 is 16#2003.
4. If the value in S exceeds the range, an operation error occurs, the instruction is not executed, SM0 is ON, and the
3
error code in SR0 is 16#2003.
The file into which the data is written
The file format:
The values are separated by a comma.
16#0011
The unit of the value is a word.
The file name extension is .cvs.
Use ASCII codes.
- The data that is written into the file
The size of the data that is written into the file is 48 words.
16#000A Ten values are written into every line.
The file name is "Test1".
The data that is written into the memory card replaces the values in the file
starting from the first value.
Cha p ter 6 App l ied Ins truc tio ns
Description
6_
6 - 8 4 9