Delta AS Series Programming Manual page 453

AS Series Programming Manual
Additional remarks
1. If D+n-1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#2003.
Example 3
1. During the execution of this instruction, if the external interrupt input is received through X0.0
Value in n
n = 1
n = 0
n = 0
_6
X0.0 external interrupt program:
6 - 1 7 4
D device
High-speed output point Y0.0
High-speed output point Y0.2
Without output completion auto-reset flag
High-speed output point Y0.4
With output completion auto-reset flag SM510
Action Descriptions
Refresh new pulse positon Y0.0
immediately (SR460)
1. Stop high-speed outputting
2. Set the stop flag SM483 to ON
3. Refresh the current
corresponding output position
SR480
1. Set the output completion auto-
reset flag SM510 to OFF
2. Refresh the current
corresponding output position.
SR500