Delta AS Series Programming Manual page 674

If the minimum output value in S
executed.
2. Only the 32-bit instructions can use the 32-bit counter, but not the device E.
Example

When X0.0 is ON, the instruction converts the state of X1 into a binary value, and stores the conversion result in
D0. Then the instruction compares the value in D0 with 500 and 5000, and stores the comparison result in D1.
Minimum output
value
500
Additional remarks
If the minimum output value in S
ON, and the error code in SR0 is 16#2003.
is larger than the maximum output value in S
1
Maximum output
Output value in D0
value
5000
is larger than the maximum output value in S
1
Ch ap te r 6 Ap pl ie d Instruc ti ons
, the instruction is not
2
Function
499 D0<500
5001 D0>5000
500≦D0≦5000
600
, the instruction is not executed, SM0 is
2
Output value in D1
6_
500
5000
600
6 - 3 9 5