Delta AS Series Programming Manual page 634

Device
D Number of equal values
Data number of the first equal
D+1
value
Data number of the last equal
D+2
value
Data number of the minimum
D+3
value
Data number of the maximum
D+4
value
2. The operand n must be between 1–256.
3. Only the 32-bit instructions can use the 32-bit counter, but not the device E.
Example
1. When X0.0 is ON, the instruction compares the values in D10–D19 with the value in D0, and stores the
comparison results in D50–D54. When the equal value does not exist in D10–D19, the values in D50–D52 are 0.
2. The instruction stores the data number of the minimum value in D53, and stores the data number of the maximum
value in D54. If there is more than one minimum value or maximum value, the instruction stores the data number
that is bigger.
Description
Ch ap te r 6 Ap pl ie d Instruc ti ons
6_
6 - 3 5 5