Delta AS Series Programming Manual page 464

Example
1.
When X0.0 is ON, the instruction specifies the timer T0, and the setting value of T0 is five seconds.
2.
Y0.0 is the off-delay contact. When X0.0 switches to ON, Y0.0 is ON. Five seconds after X0.0 switches to OFF,
Y0.0 is OFF.
3.
When X0.0 switches to OFF, Y0.0 is ON for five seconds.
4.
When X0.0 switches ON, Y0.2 is ON for five seconds.
5.
Five seconds after X0.0 switches to ON, Y0.3 is ON. Five seconds after X0.0 switches to OFF, Y0.3 is OFF.
X0.0
Y0.0
Y0.1
Y0.2
5 s econds
Y0.3
5 s econds
6.
When the conditional contact X0.0 is followed by the b contact Y0.3, the flasher circuit passes through Y0.1 and
Y0.2. When X0.0 is switched OFF, Y0.0, Y0.1, and Y0.3 are switched OFF, and T0 is reset to 0.
X 0.0
Y 0.1
Y 0.2
5 s econds
5 s econds
5 s econds
5 s econds 5 s econds
5 s econds 5 s econds
5 s econds
Ch ap te r 6 Ap pl ie d Instruc ti ons
6_
6 - 1 8 5