Delta AS Series Programming Manual page 383

A S S er i es Pr og r am m ing M an u a l
Additional remarks
1. If n is less than 1, or larger than 256, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#200B.
2. If the devices specified by S+n-1 and D+n-1 exceed the range of possible devices, the instruction is not executed,
SM0 is ON, and the error code in SR0 is 16#2003.
3. If the conversion result is not between 0–9,999, the instruction is not executed, and the error code in SR0 is
16#200D. The binary-coded decimal value is represented by the hexadecimal number, but one of digits is not in
between 0–9.
4. If S–S+n-1 overlaps D–D+n-1, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200C.
_6
6 - 1 0 4