Delta AS Series Programming Manual page 1227

AS Ser ies Pro gra mm in g M anu al
Example
1. Draw a DELTA LOGO as the figure below.
2. Steps: divide the logo into three parts.

For an ellipse: use the DCICR instruction for the relative-position clockwise arc interpolation.

The absolute coordinates of the ellipse: P1（39930，-9982）, P2（-9982，39930）, P3（73206，123119） and
P4（123119，73206）.
_6

Taking （39930，-9982）as the starting point, yields these relative coordinates: （-49912，49912）, （83188，
83189）, （49913，-49913） and （-83189，-83188）.
6 - 9 4 8