Delta AS Series Programming Manual page 1010

Example
Suppose the value in D0 is 0.
When X0.0 is ON for the first time, the instruction transmits the data in E0–E9 to D1–D10 and increments the value in D0
to 1.
When X0.0 switches from OFF to ON for the second time, the instruction transmits the data in E0–E9 to D17–D26, and
increments the value in D0 to 2.
When X0.0 switches from OFF to ON for the n
Additional remarks
1. If the value in D is not between 0–99, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#2003.
2. If the range of devices is not sufficient for D+((the value in D)+1)*16-1), the instruction is not executed, SM0 is ON,
and the error code in SR0 is 16#2003.
th
time, the instruction transmits the data in E0–E9 to (n*16)+1–(n*16)+10.
Ch ap te r 6 Ap pl ie d Instruc ti ons
6_
6 - 7 3 1