Delta AS Series Programming Manual page 1092

6. If data is sent through a UDP socket, and no error occurs after the instruction is executed, the flag for sent data is
ON. If an error occurs, the error flag is ON.
UDP Socket Number
1
2
3
4
7. In general, the SSENDP pulse instruction is used.
Example
Refer to the example in the SOPEN instructions (API 2200).
Additional remarks
1. The following table explains TCP connection errors.
Error Code
16#2003
16#600D
16#6202 TCP Socket error flag
16#6203 TCP Socket error flag
16#6204 TCP Socket error flag
16#6205 TCP Socket error flag
16#6212 TCP Socket error flag
16#6214 TCP Socket error flag
16#6215 TCP Socket error flag
16#6218 TCP Socket error flag
Data Sending
SM1336
SM1341
SM1346
SM1351
Error Flag
SM0 S or S
1 2
SM1100 Ethernet network not connected
Illegal TCP Socket mode setting
Illegal address for sending data
Length of sent data exceeds the range
Source data device exceeds the range
TCP Socket connection timeout
TCP Socket connection rejected by remote equipment
TCP Socket not connected
Sending of data triggered
Ch ap te r 6 Ap pl ie d Instruc ti ons
Description
exceeds the range
Error Flag
SM1338
SM1343
SM1348
SM1353
6 - 8 1 3
6_ 6