Delta AS Series Programming Manual page 628

D6 D5 D4 D3
30 9578
2235 754
After the shift
D6 D5 D4 D3
0 30 9578
2235
Being cleared to 0
Example 2
When M0 is ON, When M0 switches from OFF to ON, the instruction shifts the 7 pieces of 32-bit data in D0–D13 one
place to the right, and clears the data in D12 to 0.
D12 D10 D 8
90000 80000 70000
After the shift
D12 D10 D 8
0 90000 80000
Additional remarks
1. If D+n-1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#2003.
2. For 16-bit instruction, the value in the operand n must be between 1–512. For 32-bit instruction, the value in the
operand n must be between 1–256. If not, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#200B.
D2 D1 D0
28 423 11
D2 D1 D0
754 28 423
D6 D4 D2
60000 50000 30000
D6 D4 D2
70000 60000 50000
C ha pt er 6 A p pl i e d In s tr uc t io ns
D0
40000
D0
30000
6_
6 - 3 4 9