Delta AS Series Programming Manual page 1211

AS Ser ies Pro gra mm in g M anu al
2.
The mark alignment function is enabled in the ramp-up and target frequency and ramp-down sections. (Horizontal
coornate (x axis) represents TIME and vertical coornate (y axis) represents PULSE.)
When the mark alignment function is not enabled, set S

Green line: signal of mark aligment

Blue line: the actual output speed
Case 1: when the mark alignment occurs in the ramp-up section

Green line: signal of mark aligment

Blue line: the actual output speed
The operation of the mark alignment (green line: OFF -> ON) begins when the number of pulses is 3000. The target
_6
frequency of 10 kHz cannot be reached even if S
6 - 9 3 2
100,000 pulse
15,000 pulse
= 100,000; the output stops after 100,000 pulses.
1
is 15,000.
6