Delta AS Series Programming Manual page 1237

AS Ser ies Pro gra mm in g M anu al
Example
1. Draw a DELTA LOGO as the figure below.
2. Steps: divide the logo into three parts.

For an ellipse: use the DCICR instruction (API 2712) for the relative-position counterclockwise arc interpolation.

The absolute coordinates of the ellipse: P1(39930，-9982), P4 (123119，73206), P3 (73206，123119) and P2 (-
9982，39930)
_6

Taking (39930，-9982) as the start point, the obtained relative coordinates: (83189, 83188), (-49913, 49913), (-
83188，-83189) and (49912，-49912).
6 - 9 5 8