Delta AS Series Programming Manual page 735

AS Ser ies Pro gra mm in g M anu al
Programming Example
1. Configure parameters of AS02PU module in HWCONFIG. Set "Pulse Y0.0+ Direction 0.1" for the output point.
Parameters of axis 1 are set as default.
2. When M0=ON, execute DPUJOG on axis 1 to perform jog outputs. Pulses would be output from Y0.0 at 1kHz
frequency. The direction would be positive if Y0.1=OFF.
3. When the instruction is being executed, M1 would change to ON.
_6
6-456