Delta AS Series Programming Manual page 1146

API Instruction code
2401 TKOFF
Device
X Y M
 
S
Data
type

S
Symbol
Explanation
1. This instruction disables the cyclic task specified by S.
2. When the PLC runs, the execution of the cyclic tasks depends on the setting of the cyclic tasks in ISPSoft.
3. The operand S must be between 0-31.
4. Refer to the ISPSoft User Manual for more information about creating and enabling tasks.
Example
When the PLC runs, cyclic task (0) and cyclic task (1) are enabled. When the TKOFF instruction in cyclic task (0)
executes, it disables cyclic task (1), and Y0.0 is OFF.
You create cyclic tasks in ISPSoft and you define their default enabled/disabled state in ISPSoft. Cyclic task (0) and
cyclic task (1) are enabled when the PLC runs, and cyclic task (1) is disabled when the TKOFF instruction in cyclic task
(0) executes. Cyclic task (1) is disabled by the execution of the TKOFF instruction in cyclic task (0).
Operand
P S
S T C HC

Pulse instruction
S ： Task number
Ch ap te r 6 Ap pl ie d Instruc ti ons
D FR SM SR
  
16-bit instruction
AS AS
Function
Disabling a cyclic task
E K 16# "$"
 
32-bit instruction
-
6 - 8 6 7
F
6_