Delta AS Series Programming Manual page 926

RTU mode

AS sends the communication command: "01 05 05 00 FF 00 8C F6"

AS receives the communication command: "01 05 05 00 FF 00 8C F6"
If the format is correct, SM100 is ON.
3. After receiving the data from the DVP-ES2, the PLC confirms the data format sent back from the DVP-ES2 and
determines if it is correct. If no error occurs in the format, the corresponding special flags SM100 are ON; if not
SM102 is ON.
4. When the DVP-ES2 receives this instruction, the Y0 is ON.
5. Since this function code writes data, the operand n is ignored.
Cha p ter 6 App l ied Ins truc tio ns
6_
6 - 6 4 7