Delta AS Series Programming Manual page 497

Hide thumbs Also See for AS Series:

Table of Contents

AS Ser ies Pro gra mm in g M anu al

Instruction code

This instruction is only available for AS Series PLCs with firmware version 1.04.00 or higher. The instruction cannot

be used in the ST programming language, interrupt tasks or function block which is called only once.

Use this instruction along with API 0710 YOUT. It is very useful for the applications of assembly and processing

with multiple work stations, including painting, carpentry, metalwork sectors and many more.

for setting the trigger input points; the high-speed inputs are X0.0–X0.15 and the other inputs are general

type. Executing the instruction enables the external interrupts for the inputs (X0.0–X0.15). Therefore do NOT use

the inputs with interrupt tasks; otherwise, when the instruction is executed, the interrupts are disabled and resumed

only after the instruction completes. The general type inputs are affected by the scan time though they are suitable

for the environments where the inputs are not as stable.

Pulse instruction

： Trigger input point

： High-speed counter number

Setting for the numbers for work

station and objects

Reference value for comparison and

the observational error

First corresponding device for the

comparison result in the stack area

Setting up to compare the inputs of

multiple work stations

16-Bit instruction

32-Bit instruction

Show Quick Links

Table of Contents

Troubleshooting