If-Match Acl - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
1: Monitor level
Parameters
ip-prefix-name: IP prefix list name, a string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip ip-prefix to display the statistics of an IPv4 prefix list. If no ip-prefix-name is specified,
statistics for all IPv4 prefix lists will be displayed.
Related commands: ip ip-prefix.
Examples
# Display the statistics of IPv4 prefix list abc.
<Sysname> display ip ip-prefix abc
Prefix-list abc
Permitted 0
Denied 0
index: 10
Table 95 Command output.
Field
Prefix-list
Permitted
Denied
index
permit
1.0.0.0/11
ge
le

if-match acl

Syntax
if-match acl acl-number
undo if-match acl
View
Routing policy view
permit 1.0.0.0/11
Description
Name of the IPv4 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Index of the IPv4 prefix list
Match mode: permit or deny
IP address and mask
greater-equal, the lower limit
less-equal, the higher limit
430
ge 22 le 32