Display Ipv6 Routing-Table Acl - HP 6125XLG Command Reference Manual

Field
AttrID
Neighbor
Flags
OrigNextHop
RealNextHop
BkLabel
BkNexthop
Interface
BkTunnel ID
BkInterface

display ipv6 routing-table acl

Use display ipv6 routing-table acl to display routing information permitted by a specific IPv6 basic ACL.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] acl acl6-number [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
acl6-number: Specifies a basic IPv6 ACL by its number in the range of 2000 to 2999.
verbose: Displays detailed information about all routes permitted by the basic IPv6 ACL. Without this
keyword, the command displays only brief information about active routes permitted by the basic IPv6
ACL.
Usage guidelines
If the specified IPv6 ACL does not exist or has no rules configured, the command displays information
about all IPv6 routes.
Examples
# Display brief information about active routes permitted by IPv6 ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access control list : 2000
Summary Count : 3
Description
Attribute ID.
Address of the neighbor determined by the routing protocol.
Flags of the route.
Next hop address of the route.
Real next hop of the route.
Backup label.
Backup next hop.
Output interface for packets to be forwarded along the route.
Backup tunnel ID.
Backup output interface.
15