Display Bgp Ipv6 Multicast Routing-Table As-Path-Acl - HP 6125G Command Reference Manual

Field
PrefixLen
NextHop
MED
LocPrf
Path
PrefVal
Label
Ogn

display bgp ipv6 multicast routing-table as-path-acl

Syntax
display bgp ipv6 multicast routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
as-path-acl-number: Displays routing information that matches an AS path list numbered 1 to 256
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 multicast routing-table as-path-acl to display the IPv6 MBGP routes that match the
specified AS path list.
Description
Prefix length of the address.
Next hop IP address.
Multi-Exit Discriminator.
Local precedence.
AS_PATH attribute of the path, recording the ASs that it has passed to
avoid routing loops.
Preferred value for a route.
Label.
ORIGIN attribute of the route:
•
i—Indicates that the route is interior to the AS. Summary routes and
routes injected via the network command are considered IGP
routes.
•
e—Indicates that the route is learned from the Exterior Gateway
Protocol (EGP).
•
?—Indicates that the origin of the route is unknown and the route is
learned by some other means. BGP sets the ORIGIN attribute of
routes learned from other IGP protocols to incomplete.
370