Table of Contents
Advertisement
Configuration and management
Review TX54 default settings
You can review the default settings for your TX54 device by using the local WebUI or Digi Remote
Manager:
Local WebUI
1. Log into the TX54 WebUI as a user with Admin access. See
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. Click Device Management to display a list of your devices.
3. Locate and select your device as described in
your
device.
4. Click Configure.
The following tables list important factory default settings for the TX54.
Default interface configuration
Interface type
Wide Area Network (WAN)
Wireless Wide-Area
Networks (WWANs)
TX54 User Guide
Use Digi Remote Manager to view and manage
Preconfigured
interfaces
Devices
WAN1
Ethernet:
n
n
ETH1
Single-cellular
Single-cellular
n
n
models: WWAN
models:
Dual-cellular
WWAN1
n
models:
cellular
WWAN1
modem
Dual-cellular
n
models:
WWAN
cellular
modem
Review TX54 default settings
Using the web interface
for details.
Default configuration
Firewall zone: External
n
WAN priority: Metric=1
n
IP Address: DHCP
n
client
TM
Digi SureLink
n
enabled for IPv4
Firewall zone: External
n
WAN priority: Metric=3
n
SIM failover after 5
n
attempts
SureLink enabled for
n
IPv4
28
Advertisement
Table of Contents
