System - Digi TX54 User Manual

Command line interface

system

System commands.
system backup [passphrase STRING] type STRING PATH
Save the device's configuration to a file. Archives are full backups including generated SSH keys and
dynamic DHCP lease information. Command backups are a list of CLI commands required to build the
device's configuration.
Parameters
passphrase
Encrypt the archive with a passphrase.
Depend: 1/type = archive
Optional: True
Type: string
type
The type of backup file to create. Archives are full backups including generated SSH keys and dynamic
DHCP lease information. CLI configuration backups are a list of CLI commands used to build the
device's configuration.
Default: archive
Syntax: (cli-config|archive)
Type: string
References
The file path to save the backup to.
Type: string
system disable-cryptography
Erase the device's configuration and reboot into a limited mode with no cryptography available. The
device's shell will be accessible over Telnet (port 23) at IP address 192.168.210.1. To return the device
to normal operation, perform the configuration erase procedure with the device's ERASE button twice
consecutively.
Parameters
system factory-erase
Erase the device to restore to factory defaults. All configuration and automatically generated keys will
be erased.
Parameters
system restore [passphrase STRING] PATH
Restore the device's configuration from a backup archive or CLI commands file.
TX54 User Guide
Command line reference
795