Table of Contents
Advertisement
Firewall
Configure captive portals
Captive portals are commonly used on public-access networks to require users to login or accept
terms and conditions before accessing the internet.
To configure captive portals:
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Captive portals.
4. For Add captive portal:, enter a name for the portal and click .
The captive portal configuration window is displayed.
The captive portal is enabled by default. To disable, click to toggle off Enable.
5. For Interface, select the network interface for the portal.
Traffic received on this interface's network device will not be forwarded unless the client has
been granted access.
6. For Session timeout, type the amount of time that a user session remains valid. After the
session times out, the user will be required to log in again.
TX54 User Guide
Configure captive portals
589
Advertisement
Table of Contents
