Table of Contents
Advertisement
Configuration and management
Review TX54 default settings
You can review the default settings for your TX54 device by using the local WebUI or Digi Remote
Manager:
Local WebUI
1. Log into the TX54 WebUI as a user with Admin access. See
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. Click Device Management to display a list of your devices.
3. Locate and select your device as described in
your
device.
4. Click Configure.
The following tables list important factory default settings for the TX54.
Default interface configuration
Interface type
Wide Area
Network (WAN)
TX54 User Guide
Preconfigured interfaces
WAN1
n
Review TX54 default settings
Using the web interface
Use Digi Remote Manager to view and manage
Devices
Default configuration
Ethernet:
n
n
ETH1
n
n
n
for details.
Firewall zone:
External
WAN priority:
Metric=1
IP Address: DHCP
client
TM
Digi SureLink
enabled for IPv4
39
Advertisement
Table of Contents
