Save Configuration To A File - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

System administration

1. Log into the TX54 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. Make any necessary configuration changes.

4. Save the configuration and apply the change:

(config)> save

Configuration saved.

5. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Save configuration to a file

You can save your TX54 device's configuration to a file and use this file to restore the configuration,

either to the same device or to similar devices.

This procedure creates a binary archive file containing the device's configuration, certificates and

keys, and other information.

1. Log into the TX54 WebUI as a user with Admin access.

2. On the main menu, click System. Under Configuration, click Configuration Maintenance.

The Configuration Maintenance windows is displayed.

TX54 User Guide

Configuration files