Digi TX54 User Manual page 186

Wi-Fi
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Client mode connections.
4. For Add WiFi client:, type the name of the client and click .
The Wi-Fi client configuration window is displayed.
New Wi-Fi clients are enabled by default. To disable, or to enable a client if it has been disabled,
click Enable.
5. For Radio, select the appropriate Wi-Fi radio.
6. Configure the Wi-Fi network that the client will use:
a. Click to expand SSID list.
b. Enter the SSID of the access point that the client will use to connect to the Wi-Fi network.
c. Select the type of Encryption used by the access point.
n
n
TX54 User Guide
If WPA Personal (PSK) or WPA2 Personal (PSK) is selected as the type of
Encryption, for Pre-shared key, enter the password that the client will use to
connect to the access point.
If WPA2 Enterprise is selected as the type of Encryption, enter the Username and
Password that the client will use to connect to the access point.
Configure a Wi-Fi client and add client networks
186