Table of Contents
Advertisement
User authentication
6. (Optional) Change the default Port setting to the appropriate port.
7. For Secret, type the RADIUS server's shared secret. This is configured in the secret parameter
of the RADIUS server's client.conf file, for example:
secret=testing123
8. For Timeout, type or select amount of time in seconds to wait for the RADIUS server to
respond. Allowed value is any integer from 3 to 60. The default value is 3.
9. (Optional) Click RADIUS debug to enable additional debug messages from the RADIUS client.
10. (Optional) For NAS ID, type the unique identifier for this network access server (NAS). You can
use the fully-qualified domain name of the NAS or any arbitrary string. If not set, the default
value is used:
If you are accessing the TX54 device by using the WebUI, the default value is for
n
NAS ID is httpd.
If you are accessing the TX54 device by using ssh, the default value is sshd.
n
11. (Optional) Click again to add additional RADIUS servers.
12. Add RADIUS to the authentication methods:
a. Click Authentication > Methods.
b. For Add method, click .
c. Select RADIUS for the new method from the Method drop-down.
Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned.
13. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
Command line
1. Log into the TX54 command line as a user with full Admin access rights.
TX54 User Guide
Remote Authentication Dial-In User Service (RADIUS)
549
Advertisement
Table of Contents
