Digi TX54 User Manual page 269

Routing
i. Click to expand Destination address.
ii. For Type, select Zone.
iii. For Zone, select CellularWAN.
6. Create a packet filtering rule that rejects all other LAN packets on the cellular WAN interface.
a. Click Firewall > Packet filtering.
b. Click the  to add a new packet filtering rule.
c. For Label, type Reject LAN traffic to cellular WAN.
d. For Action, select Drop.
e. For Source zone, select Internal.
f. For Destination zone, select CellularWAN.
7. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
TX54 User Guide
IP routing
269