Digi TX54 User Manual page 223

Hotspot
See
information about configuring hotspot for RADIUS shared password authentication.
radius_user: Requires each user to enter username and password credentials that are
n
established on an external RADIUS server. The credentials are validated by the RADIUS
server.
See
configuring hotspot for RADIUS users authentication.
hotspotsystem: Requires each user to be authenticated by HotspotSystem, a cloud
n
hotspot service that supports various free and paid authentication methods, including
social media account, SMS, voucher, and PayPal.
See
configuring hotspot for HotspotSystem authentication.
9. Set the login page source. (This option is not available if auth is set to hotspotsystem.)
(config network hotspot new_hotspot)> login value
(config network hotspot new_hotspot)>
where value is either:
local: Uses an HTML page for authentication that is stored locally on the TX54 device's
n
filesystem, in the /etc/config/hotspot directory. Note that the hotspot directory is not
visible until hotspot has been enabled for the first time.
remote: Uses an HTML page for authentication that is served by a remote web server.
n
10. (Optional) If local is selected for login, set the name of the local HTML file used for
authentication. (This option is not available if auth is set to hotspotsystem.)
(config network hotspot new_hotspot)> local_page HTML_filename
(config network hotspot new_hotspot)>
Normally, this parameter should be left blank, and the device will use the default
authentication HTML page. See
default authentication HTML page used for each authentication mode.
If you upload a custom HTML file that uses a filename other than the default filename, type the
custom filename here. See
creating and uploading custom HTML files.
11. (Optional) Set the port number that the hotspot authentication server will used.
(config network hotspot new_hotspot)> auth_port port
(config network hotspot new_hotspot)>
The default is 3990.
12. (Optional) Set the port number of the hotspot server.
(config network hotspot new_hotspot)> server_port port
(config network hotspot new_hotspot)>
The default is 4990.
TX54 User Guide
Configure the hotspot to use RADIUS shared password authentication
Configure the hotspot to use RADIUS users authentication
Configure the hotspot to use HotspotSystem authentication
Hotspot authentication modes
Upload custom hotspot HTML pages
Hotspot configuration
for
for information about
for information about
for information about the
for more information about
223