Configuration And Management; Review Ix14 Default Settings; Change The Default Password For The Admin User - Digi IX14 User Manual

Configuration and management

Review IX14 default settings

The following table lists factory default settings for the IX14.
Central
management
Interface
priorities
Modem
configuration
Network
settings
Security
policies
Services
Monitoring

Change the default password for the admin user

The unique, factory-assigned password for the default admin user account is printed on the bottom
label of the device and on the loose label included in the package.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin user will revert to the original, factory-assigned default password.
Note If your device was manufactured prior to the release of firmware version 19.11.x, the default
user name may be root.
To change the default password for the admin user:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX14 User Guide
Digi Remote Manager enabled as the central management service.
n
Modem (cellular) is WAN interface with metric of 3.
n
LAN (Ethernet) with metric of 5.
n
SIM failover after 5 attempts.
n
LAN subnet of 192.168.2.1/24.
n
DHCP enabled.
n
Source NAT enabled (outbound traffic).
n
Packet filtering allows all outbound traffic.
n
SSH, web admin, and local admin access enabled.
n
Bluetooth service enabled to allow the Digi Remote Manager mobile app
n
to automatically register using the QR code on the device label. You can
disable Bluetooth service after the device is provisioned.
Device heath metrics uploaded to Digi Remote Manager at 60 minute
n
interval.
Review IX14 default settings
34