Default Wi-Fi Configuration - Digi TX54 User Manual

Wi-Fi

Default Wi-Fi configuration

The default Wi-Fi configuration of the TX54 device is:
Radios:
n
Enabled or disabled
Frequency band
Access point mode
Channel
Channel width
Beacon interval
Access points:
n
Enabled or disabled
Radio
SSID
SSID broadcast
Encyrption
Pre-shared key
Group rekey interval
Client mode connections: none.
n
TX54 User Guide
Wi-Fi radio (single-Wi-Fi
models)
Wi-Fi1 radio (dual-Wi-Fi
models)
Enabled
2.4 GHz
802.11b/g/n
Automatic
20/40 MHz
100
Digi AP (dual-cellular
models)
Digi AP (Wi-Fi1) (single-Wi-Fi
and dual-Wi-Fi models)
Disabled
Wi-Fi radio for single-Wi-Fi
models; Wi-Fi1 radio for single-
Wi-Fi and dual-Wi-Fi models
Not set
Enabled
WPA2 Personal (PSK)
Default password as found on
the device's label
10 minutes
Wi-Fi configuration
Wi-Fi2 radio (dual-Wi-Fi
models only) :
Enabled
5 GHz
802.11ac/n
Automatic
40 MHz
100
Digi AP (Wi-Fi2) (dual-Wi-Fi
models only) :
Disabled
Wi-Fi2 radio
Not set
Enabled
WPA2 Personal (PSK)
Default password as found on
the device's label
10 minutes
159