Digi TX54 User Manual page 121

Interfaces
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the show network
> show network
Interface
----------------
defaultip
defaultlinklocal
lan1
lan1
loopback
wan1
wan1
wwan1
wwan1
wwan2
wwan2
>
3. Enter show network interface name at the Admin CLI prompt to display additional
information about a specific LAN. For example, to display information about LAN1, enter show
network interface lan1:
> show network interface lan1
lan1 Interface Status
---------------------
Device
Zone
IPv4 Status
IPv4 Type
IPv4 Address(es)
IPv4 Gateway
IPv4 MTU
IPv4 Metric
IPv4 Weight
IPv4 DNS Server(s)
IPv6 Status
IPv6 Type
IPv6 Address(es)
IPv6 Gateway
IPv6 MTU
IPv6 Metric
IPv6 Weight
IPv6 DNS Server(s)
TX54 User Guide
command at the Admin CLI prompt:
Proto Status Address
----- ------- -------------------------------
IPv4 up 192.168.210.1/24
IPv4 up 169.254.100.100/16
IPv4 up 192.168.2.1/24
IPv6 up fd00:2704::1/48
IPv4 up 127.0.0.1/8
IPv4 up 10.10.10.10/24
IPv6 up fe00:2404::240:f4ff:fe80:120/64
IPv4 up 10.200.1.101/30
IPv6 down
IPv4 pending
IPv6 down
: lan1
: internal
: up
: static
: 192.168.2.1/24
:
: 1500
: 5
: 10
:
: up
: prefix
: fd00:2704::1/48
:
: 1500
: 5
: 10
:
Local Area Networks (LANs)
121