Revision History-90002357 - Digi TX54 User Manual

Revision history—90002357
Revision Date
A November 2019
B Februrary 2020
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2020 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
 Product name and model
 Product serial number (s)
 Firmware version
 Operating system/browser (if applicable)
 Logs (from time of reported issue)
 Trace (if possible)
TX54 User Guide
Description
Initial release of DigiTX54 firmware version 19.11.
Release of DigiTX54 firmware version 20.2:
TM
Digi SureLink support (formerly known as active
n
recovery).
Enabled by default on preconfigured WANs and
l
WWANs.
Role-based user access.
n
Allow shell option added to authentication.
l
Read-only access option added to user
l
configuration.
2