Digi TX54 User Manual page 799

Command line interface
port
Specifies the destination port base traceroute will use (the destination port number will be
incremented by each probe). A value of -1 specifies that no specific port will be used.
Default: -1
Minimum: -1
Syntax: {Integer}
Type: integer
src_addr
Chooses an alternative source address. Note that you must select the address of one of the
interfaces. By default, the address of the outgoing interface is used.
Optional: True
Syntax: {IPv4_address|IPv6_address}
Type: string
tos
For IPv4, set the Type of Service (TOS) and Precedence value. Useful values are 16 (low delay) and 8
(high throughput). Note that in order to use some TOS precedence values, you have to be super user.
For IPv6, set the Traffic Control value. A value of -1 specifies that no value will be used.
Default: -1
Minimum: -1
Syntax: {Integer}
Type: integer
verbose
Verbose output.
Syntax: {True|False}
Type: boolean
waittime
Determines how long to wait for a response to a probe.
Default: 5
Minimum: 1
Syntax: {Integer}
Type: integer
host
The host that we wish to trace the route packets for.
Syntax: {hostname|IPv4_address|IPv6_address}
Type: string
TX54 User Guide
Command line reference
799