Table of Contents
Advertisement
System administration
Configuration files
The TX54 configuration file, /etc/config/accns.json, contains all configuration changes that have been
made to the device. It does not contain the complete device configuration; it only contains changes to
the default configuration. Both the default configuration and the changes contained in the accns.json
file are applied when the device reboots.
Save configuration changes
When you make changes to the TX54 configuration, the changes are not automatically saved. You
must explicitly save configuration changes, which also applies the changes. If you do not save
configuration changes, the system discards the changes.
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Make any necessary configuration changes.
4. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
Command line
TX54 User Guide
Configuration files
635
Advertisement
Table of Contents
