Digi TX54 User Manual page 668

Monitoring
The access control list for the SSH port used by the Wi-Fi scanner to stream output to a remote
n
host.
When the Wi-Fi scanner is enabled, the TX54 device will automatically configure its firewall
rules to allow incoming connections on the configured listening port. You can restrict access by
configuring the access control list for the Wi-Fi scanner's listening port.

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > Wi-Fi scanner.
4. Click Enable.
5. (Optional) For Channels, type the Wi-Fi channels that will be scanned by this instance of the
service.
Allowed value is a comma-separated list of channel numbers, or all to scan all channels. The
default is all.
6. (Optional) For Hop frequency, type the frequency, in milliseconds, that the Wi-Fi scanner will
hop from one channel to the next during scanning.
TX54 User Guide
Enable the Wi-Fi scanner
668